This cable detector works acoustically and offers a quick and inexpensive solution to find voltage-free lines in the house installation, to test telephone lines, to identify individual cables / wires or to carry out a continuity test. With the transmitter / sound generator, a carrier signal is modulated onto an electrical conductor, which you can track with the receiver / amplifier and the integrated speaker or via a headphone. You can also adjust the sensitivity using a rotary wheel on the receiver in order to carry out the best possible identification. When connected to a telephone socket via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or "ringing". In addition, the transmitter has a continuity test, which lights up when passing through and weakens as the resistance increases.
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.